Sno-Cone Machine Instructions

Thank you for renting from Canton Canopies, please take a moment and review the care and instructions of your rented equipment.

To prevent personal injury or property damage, read and follow the instructions and/or warnings.  Important Safeguards.  Use electricity safely and wisely.  Observe safety precautions when using your Sno Cone machine including the following:

 

ELECTRICAL REQUIREMENTS

 

The Sno-King operates on 120 volt, 15 amp, single phase, 60 cycle AC current. Be sure that your electrical supply meets this requirement.

 

ICE REQUIREMENTS

 

The Sno-King can take ice cubes or block ice, if you break the block into pieces approximately 3 to 4 inches in size. NOTE: The ice will not enter the shaving chute if the pieces are too large.

 

TO OPERATE THE SNO-KING

 

  1. Plug the power cord into an appropriate outlet.
  2. Fill the hopper to within an inch of the top                                                    with ice cubes (no larger than 3”to 4”).
  3. Toggle the POWER switch to the ON position.
  4. While pushing the red MOTOR button, apply downward pressure to the pusher handle. Apply firm even pressure to make the best snow.

 NOTE: Never allow any foreign or metallic objects around the shaver area of the Sno-King.  Ice picks, scoops, and debris that may be in the ice often damage blades.

 

CLEANING

 

Please wipe off the machine inside and out and dry with a soft cloth.

 

WARNING

Never put your fingers or any object into the shaver body or hopper while the motor is running. Serious injury may occur.

 

Comments are closed.